New Mustang 2044
| Dimensions | |
| Overall Operating Height - Fully Raised (mm) | 143.5" (3645) |
| Height to Hinge Pin - Filly Raised (mm) | 112" (2845) |
| Overall Height to Top of ROPS (mm) | 77.7" (1974) |
| Ground Clearance to Chassis (mm) | 7.5" (191) |
| Overall Length with Bucket (mm) | 123.5" (3137) |
| Overall Length without Bucket (mm) | 95" (2413) |
| Wheelbase (mm) | 36.7" (932) |
| Dump Reach at Full Height (mm) | 25.7" (654) |
| Bucket Rollback at Ground | 28° |
| Dump Angle | 32° |
| Overall Width (mm) | 59" (1499) |
| Overall Width - Narrow Offset Tire Option (mm) | N/A |
| Bucket Width (mm) | 61.5" (1562) |
| Clearance Circle - Rear (mm) | 50.5" (1283) |
| Clearance Circle - Front without Bucket (mm) | 39.3" (997) |
| Clearance Circle - Front with Bucket (mm) | 73" (1854) |
| Seat to Ground Height (mm) | 34.6" (879) |
| Rollback at Full Height | 100° |
| Dump Height (mm) | 88.2" (2242) |
| Departure Angle | 24° |
| Standard Tire Size | 10.00 x 16.5 HD |
Engine |
|
| Make | Yanmar |
| Model | 4TNV-88* |
| Net Power (kW) @ 2500 rpm | 47 hp (35) |
| Displacement (L) | 3000 rpm |
| Maximum Torque (Nm) @ 1650 rpm | 134 cu.in. (2.2) |
Hydraulic System |
|
| Auxilliary Hydraulics - Standard (L/min) | 18.5 gpm (70) |
| High-Flow Hydraulics - Optional (L/min) | N/A |
| System Relief Pressure (bar) | 7 micron |
| Reservoir Capacity (L) | 12 gal. (45) |
Electrical |
|
| Battery | 12-volt (700 CCA) |
| Starter (kW) | 12-volt (2.3) |
| Alternator | 40-amp |
Capacities / Weight |
|
| Rated Operating Capacity (A) (kg) | 658 kg |
| With Optional Counterweight (kg) | 703 kg |
| Tipping Load (kg) | 1315 kg |
| Fuel Tank (kg) | 14.3 gal. (54.1) |
| Travel Speed - Maximum (km/hr) | 6.6 mph (10.6) |
| Operating Weight (B) - Approximate (kg) | 2551 kg |