Mustang 2076
| Dimensions | |
| Overall Operating Height - Fully Raised (mm) | 162" (4115) |
| Height to Hinge Pin - Filly Raised (mm) | 123" (3124) |
| Overall Height to Top of ROPS (mm) | 81" (2057) |
| Ground Clearance to Chassis (mm) | 8.0" (203) |
| Overall Length with Bucket (mm) | 131" (3327) |
| Overall Length without Bucket (mm) | 99.5" (2527) |
| Wheelbase (mm) | 42.5" (1080) |
| Dump Reach at Full Height (mm) | 32" (813) |
| Bucket Rollback at Ground | 28° |
| Dump Angle | 37° |
| Overall Width (mm) | 69" (1753) |
| Overall Width - Narrow Offset Tire Option (mm) | N/A |
| Bucket Width (mm) | 70" (1778) |
| Clearance Circle - Rear (mm) | 66.3" (1684) |
| Clearance Circle - Front without Bucket (mm) | 50.5" (1283) |
| Clearance Circle - Front with Bucket (mm) | 82" (2083) |
| Seat to Ground Height (mm) | 42" (1067) |
| Rollback at Full Height | 84° |
| Dump Height (mm) | 93.5" (2375) |
| Departure Angle | 26° |
| Standard Tire Size | 12.00 x 16.5 HD |
Engine |
|
| Make | Yanmar |
| Model | 4TNV98T - Tier III |
| Net Power (kW) @ 2500 rpm | 84 hp (62.6) |
| Displacement (L) | 2500 rpm |
| Maximum Torque (Nm) @ 1650 rpm | 202 cu.in. (3.3) |
Hydraulic System |
|
| Auxilliary Hydraulics - Standard (L/min) | 21.8 gpm (82.5) |
| High-Flow Hydraulics - Optional (L/min) | 36.9 gpm (139.7) |
| System Relief Pressure (bar) | 12 micron |
| Reservoir Capacity (L) | 16 gal. (60) |
Electrical |
|
| Battery | 12-volt (950 CCA) |
| Starter (kW) | 12-volt (3.0) |
| Alternator | 95-amp |
Capacities / Weight |
|
| Rated Operating Capacity (A) (kg) | 998 kg |
| With Optional Counterweight (kg) | 1134 kg |
| Tipping Load (kg) | 1996 kg |
| Fuel Tank (kg) | 19 gal. (71.9) |
| Travel Speed - Maximum (km/hr) | 12.3 mph (19.8) |
| Operating Weight (B) - Approximate (kg) | 3393 kg |