Mustang 2054
| Dimensions | |
| Overall Operating Height - Fully Raised (mm) | 146.5" (3721) |
| Height to Hinge Pin - Filly Raised (mm) | 116" (2946) |
| Overall Height to Top of ROPS (mm) | 77.7" (1974) |
| Ground Clearance to Chassis (mm) | 7.8" (197) |
| Overall Length with Bucket (mm) | 125.5" (3188) |
| Overall Length without Bucket (mm) | 97" (2448) |
| Wheelbase (mm) | 38.5" (978) |
| Dump Reach at Full Height (mm) | 24" (610) |
| Bucket Rollback at Ground | 28° |
| Dump Angle | 34° |
| Overall Width (mm) | 60.8" (1544) |
| Overall Width - Narrow Offset Tire Option (mm) | N/A |
| Bucket Width (mm) | 61.5" (1562) |
| Clearance Circle - Rear (mm) | 59.3" (1506) |
| Clearance Circle - Front without Bucket (mm) | 45.8" (1162) |
| Clearance Circle - Front with Bucket (mm) | 74.5" (1892) |
| Seat to Ground Height (mm) | 34.8" (884) |
| Rollback at Full Height | 100° |
| Dump Height (mm) | 92" (2337) |
| Departure Angle | 26° |
| Standard Tire Size | 10.00 x 16.5 HD |
Engine |
|
| Make | Yanmar |
| Model | 4TNV-88* |
| Net Power (kW) @ 2500 rpm | 47 hp (35) |
| Displacement (L) | 3000 rpm |
| Maximum Torque (Nm) @ 1650 rpm | 134 cu.in. (2.2) |
Hydraulic System |
|
| Auxilliary Hydraulics - Standard (L/min) | 18 gpm (68.1) |
| High-Flow Hydraulics - Optional (L/min) | 28 gpm (106) |
| System Relief Pressure (bar) | 7 micron |
| Reservoir Capacity (L) | 12 gal. (45) |
Electrical |
|
| Battery | 12-volt (950 CCA) |
| Starter (kW) | 12-volt (2.3) |
| Alternator | 40-amp |
Capacities / Weight |
|
| Rated Operating Capacity (A) (kg) | 748 kg |
| With Optional Counterweight (kg) | 794 kg |
| Tipping Load (kg) | 1497 kg |
| Fuel Tank (kg) | 15 gal. (57) |
| Travel Speed - Maximum (km/hr) | 6.8 mph (10.9) |
| Operating Weight (B) - Approximate (kg) | 2758 kg |