Mustang 2041
| Dimensions | |
| Overall Operating Height - Fully Raised (mm) | 141.1" (3584) |
| Height to Hinge Pin - Filly Raised (mm) | 110" (2794) |
| Overall Height to Top of ROPS (mm) | 71.9" (1826) |
| Ground Clearance to Chassis (mm) | 8.3" (1211) |
| Overall Length with Bucket (mm) | 116.2" (2952) |
| Overall Length without Bucket (mm) | 91.1" (2413) |
| Wheelbase (mm) | 36.7" (932) |
| Dump Reach at Full Height (mm) | 22.6" (574) |
| Bucket Rollback at Ground | 29° |
| Dump Angle | 42° |
| Overall Width (mm) | 54" (1372) |
| Overall Width - Narrow Offset Tire Option (mm) | N/A |
| Bucket Width (mm) | 55" (1397) |
| Clearance Circle - Rear (mm) | 58.4" (1484) |
| Clearance Circle - Front without Bucket (mm) | 43.4" (1102) |
| Clearance Circle - Front with Bucket (mm) | 69.2" (1758) |
| Seat to Ground Height (mm) | 33.6" (853) |
| Rollback at Full Height | 99° |
| Dump Height (mm) | 86.5" (2197) |
| Departure Angle | 29° |
| Standard Tire Size | 10.00 x 16.5 HD |
Engine |
|
| Make | Yanmar |
| Model | 4TNV-88* |
| Net Power (kW) @ 2500 rpm | 46 hp (34.3) |
| Displacement (L) | 2600 rpm |
| Maximum Torque (Nm) @ 1650 rpm | 134 cu.in. (2.2) |
Hydraulic System |
|
| Auxilliary Hydraulics - Standard (L/min) | 16.5 gpm (62.5) |
| High-Flow Hydraulics - Optional (L/min) | N/A |
| System Relief Pressure (bar) | 4 micron |
| Reservoir Capacity (L) | 8 gal. (30.3) |
Electrical |
|
| Battery | 12-volt (675 CCA) |
| Starter (kW) | 12-volt (2.3) |
| Alternator | 40-amp |
Capacities / Weight |
|
| Rated Operating Capacity (A) (kg) | 612 kg |
| With Optional Counterweight (kg) | 669 kg |
| Tipping Load (kg) | 1225 kg |
| Fuel Tank (kg) | 12.4 gal. (47) |
| Travel Speed - Maximum (km/hr) | 5.4 mph (8.7) |
| Operating Weight (B) - Approximate (kg) | 2087 kg |