Mustang 2026
| Dimensions | |
| Overall Operating Height - Fully Raised (mm) | 139.6" (3546) |
| Height to Hinge Pin - Filly Raised (mm) | 107.1" (2748) |
| Overall Height to Top of ROPS (mm) | 70.3" (1786) |
| Ground Clearance to Chassis (mm) | 6.0" (152) |
| Overall Length with Bucket (mm) | 114" (2896) |
| Overall Length without Bucket (mm) | 88.9" (2258) |
| Wheelbase (mm) | 34.5" (876) |
| Dump Reach at Full Height (mm) | 22.8" (579) |
| Bucket Rollback at Ground | 29° |
| Dump Angle | 42° |
| Overall Width (mm) | 48.4" (1229) |
| Overall Width - Narrow Offset Tire Option (mm) | N/A |
| Bucket Width (mm) | 55" (1397) |
| Clearance Circle - Rear (mm) | 54.1" (1374) |
| Clearance Circle - Front without Bucket (mm) | 44.1" (1120) |
| Clearance Circle - Front with Bucket (mm) | 69.4" (1763) |
| Seat to Ground Height (mm) | 32.6" (828) |
| Rollback at Full Height | 99° |
| Dump Height (mm) | 84.5" (2146) |
| Departure Angle | 26° |
| Standard Tire Size | 27 x 8.5 x 15 HD |
Engine |
|
| Make | Yanmar |
| Model | 3TNV-88* |
| Net Power (kW) @ 2500 rpm | 35 hp (26) |
| Displacement (L) | 2800 rpm |
| Maximum Torque (Nm) @ 1650 rpm | 100 cu.in. (1.64) |
Hydraulic System |
|
| Auxilliary Hydraulics - Standard (L/min) | 14.5 gpm (55) |
| High-Flow Hydraulics - Optional (L/min) | N/A |
| System Relief Pressure (bar) | 4 micron |
| Reservoir Capacity (L) | 8 gal. (30.3) |
Electrical |
|
| Battery | 12-volt (675 CCA) |
| Starter (kW) | 12-volt (2.0) |
| Alternator | 40-amp |
Capacities / Weight |
|
| Rated Operating Capacity (A) (kg) | 476 kg |
| With Optional Counterweight (kg) | 533 kg |
| Tipping Load (kg) | 953 kg |
| Fuel Tank (kg) | 10.3 gal. (38.9) |
| Travel Speed - Maximum (km/hr) | 5.9 mph (9.5) |
| Operating Weight (B) - Approximate (kg) | 1815 kg |